Snake Tower with 2 Flow Control Taps – Chrome Plated – ABS Spout – Glycol Recirculation Loop – C1051

SKU: C1051

Available on backorder

2 Tap Snake Tower Chrome plated ABS Spout

Designed to pour out beer right through its hood, this Snake tower is Krome’s innovation from its surroundings.
With a narrow column and a curved wide head ending in the beer faucet, this double tap draft beer tower comes with Chrome plated finish over brass will be a great attraction in your bar.

The glycol recirculation loop cooling technology maintains the desired beer temperature in long drawn systems. The Flow control taps with an ABS spout used allow flow adjustment and give a less foam head to the beer when poured.

BEER TAPS:

Beer Taps are used for controlling the release of beer. Draft beer is a beer that’s “on tap,” as opposed to bottled. Next time you’re at a bar or a restaurant that has a bar, take a look at the bar itself and you’ll see a row of labeled levers. Those are the beers the bar has on tap and they’re generally fresher than the bottled selection.

2 Tap Snake Tower Chrome plated ABS Spout is a European style tap variant.
Also known as Flow control tap for its flow adjusting knob, European faucet has a thinner and longer spout than US faucet – this results in a beer pour with less foam head.

 

Glycol Recirculation Loop Technology:

Selecting the appropriate cooling technology from cooler to the faucet can help overcome critical challenges that are inherent to dispensing fresh crisp beer, especially in long drawn systems.

Glycol Recirculation Loop Technology is an excellent way to ensure the same.

In Glycol Recirculation dispensing system, beer temperature is maintained by circulating a Glycol solution through a tube in close contact with the beer lines, all wrapped together in an insulating tubing known as the python. Running from beer cooler to the point of dispensing (the beer tap), this system works efficiently even over long distances.

  • Two Flow Control Tap
  • Modern Look with Chrome Plated finish
  • Mounts on kegerator or countertop
  • Take your pouring to bold new heights
  • Stainless Steel body with brass taps and plastic tap knobs
  • Is available with Glycol Recirculation Loop Technology
  • Ensure that every pour from your draft beer tower comes out icy cold
Number of Faucets2
Body MaterialBrass
FinishChrome Plated Finish
IlluminationNon-Illuminated
Mounting SystemThrough Counter
Cooling TechnologyGlycol Recirculation Loop
Beer Line Tubing8 OD x 7 ID SS 304 Tube(mm)
Spout MaterialSS 304
Tap TypeEuropean Tap
Tap MaterialBrass

Installation Instructions

Deck mounting beer towers:

  • Make a hole of 3″ diameter on the mounting surface to connect the beer lines from cooler to tap.
Attaching beer dispensing tap:
  • Hold the tap perpendicular to the bar top and slide it to the edge of the tap shank.
  • Manually turn the nut to tighten the connection and then use a tap wrench to tighten further while making sure to not overdo.
Setting up a medallion:
  • If the medallion mounting hardware is received separately, fix it into the hole(s) on the beer tower meant for the same.
  • The medallion lens goes into the metal ring and holds it firmly in place.
  • To light up the medallion, an adapter meant for illumination also needs to be installed