Snake Tower – 3 Flow Control Tap – Chrome Plated Brass – Air Cooled Technology – C582

230.02

3 Tap Snake Tower Air cooled Chrome plated finish

Designed to pour out beer right through its hood, this Snake tower is Krome’s innovation from its surroundings.
With a narrow column and a curved wide head ending in the beer faucet, this 3-tap draft beer tower comes with Chrome plating finish over brass will be a great attraction in your bar.

The air cooled beer cooling technology maintains the desired beer temperature and works best for short runs.

 

BEER TAPS:

Beer Taps are used for controlling the release of beer. Draft beer is a beer that’s “on tap,” as opposed to bottled. Next time you’re at a bar or a restaurant that has a bar, take a look at the bar itself and you’ll see a row of labeled levers. Those are the beers the bar has on tap and they’re generally fresher than the bottled selection.

3 Tap Snake Tower Air cooled Chrome plated finish is a European style tap variant.
Also known as Flow control tap for its flow adjusting knob, European faucet has a thinner and longer spout than US faucet – this results in a beer pour with less foam head.

 

Air- Cooled Technology:

Air-cooled technology is recommended for short runs in draft beer dispensing since this system will not be able to maintain the required beer pouring temperature over long distances.
In this setup, cold air is driven from the cooler to the beer tower which runs along-side the beer lines keeping them cool.

In this System, Cold Air maintains the desired beer line temperature from the keg to the draft beer tower’s faucet, Air Cooled draft beer towers are commonly found on Kegerators, Home and Commercial Bars or applications where the tower is close to a static or forced cold air source.

  • Three Flow Control Tap
  • Modern Look with Chrome Plated Brass finish
  • Mounts on kegerator or countertop
  • Stainless Steel body with brass taps and plastic tap knobs
  • Is available with Air Cooled Technology
  • Ensure that every pour from your draft beer tower comes out icy cold
  • It is a simple and economical solution that will double your pouring power and give your bar the finished feel as you’ve always wanted
Number of Faucets3
Body MaterialBrass
FinishChrome Plated Brass
IlluminationNon- Illuminated
Mounting SystemThrough Counter
Cooling TechnologyAir Cooled Technology
Beer Line Tubing8 OD x 7 ID SS 304 Tube(mm)
Spout MaterialSS 304
Tap TypeEuropean Tap
Tap MaterialBrass

Installation Instructions

Deck mounting beer towers:

  • Make a hole of 3″ diameter on the mounting surface to connect the beer lines from cooler to tap.
Attaching beer dispensing tap:
  • Hold the tap perpendicular to the bar top and slide it to the edge of the tap shank.
  • Manually turn the nut to tighten the connection and then use a tap wrench to tighten further while making sure to not overdo.
Setting up a medallion:
  • If the medallion mounting hardware is received separately, fix it into the hole(s) on the beer tower meant for the same.
  • The medallion lens goes into the metal ring and holds it firmly in place.
  • To light up the medallion, an adapter meant for illumination also needs to be installed