10 Tap Wall Mount Bridge Tower Brushed Copper finish
Wall mount Bridge Towers are placement-friendly draft beer towers. They can install at any chosen height on a vertical surface, usually a wall. And for this feature, this beer tower series works great in any kind of bar, including tap rooms.
This beer tower is a ten-tap variety that comes in a Brushed Copper finish. The glycol recirculation loop+ cooling technology used in the tower is the best bet in maintaining the desired beer temperature in long-drawn systems.
The Flow control taps use to allow flow adjustment and give a less foam head to the beer when poured.
The Illumination feature and medallions on the tower are great for drawing attraction and branding!
Beer Taps use for controlling the release of beer. Draft beer is a beer that’s “on tap,” as opposed to bottled. Next time you’re at a bar or a restaurant that has a bar, take a look at the bar itself and you’ll see a row of labeled levers. Those are the beers the bar has on tap and they’re generally fresher than the bottled selection. In Our 10 Tap Wall Mount Bridge Tower Brushed Copper, We use satisfactory Brass Taps with a Rich grade of Plastic Knobs, Which Provide an incomparable Pouring.
Glycol Recirculation Loop+ Technology:
Glycol Recirculation Loop+ Technology is a Triple Layer Insulation. Stainless Steel Glycol Recirculation Loop + Tube uses for optimum cooling transfer. Glycol +, a food-grade antifreeze mixes with water and uses the coolant in the chiller. It is highly efficient in maintaining the temperature required for the perfect pour right up to the faucet.
Selecting the appropriate cooling technology from the cooler to the faucet can help overcome critical challenges that are inherent to dispensing fresh crisp beer, especially in long-drawn systems.
Glycol recirculation loop+ technology is an excellent way to ensure the same.
- PU Foam for optimum insulation
- 100% Stainless Steel Contact with Beer
- Aluminum Foil Tape for optimum cooling distribution