Digital Temprature thermostat

Digital Temperature thermostat

Krome Digital Temperature Thermostat is microprocessor based controller befitting for applications on normal temperature refrigerating units. It give two relay output:one for compressor and the other one for alarm signalling or as auxiliary output. Digital Temperature thermostat. provides an NTC probe input and a digital input for alarm signalling, for switching the auxiliary output or for start defrost. Suitable for applications on normal temperature refrigerating units.230V/50-60Hz.

Things to Remember:

•  Check the supply voltage is correct before connecting the instrument. Do not expose to water or moisture: use the controller only within the operating limits avoiding sudden temperature changes with high atmospheric humidity to prevent formation of condensation.
• Warning: disconnect all electrical connections before any kind of maintenance. Fit the probe where it is not accessible by the End User. The instrument must not open.

• In case of failure or faulty operation send the instrument back to the distributor or to Dixell S.r.l.(see address) with a detailed description of the fault. Consider the maximum current which can apply to each relay (see Technical Data). #
• Ensure that the wires for probes, loads and the power supply  separate and far enough from each other, without crossing or intertwining.